Zhengzhou Dingsheng Technology Co., Ltd. Crushers Machine

DSMAC Group is a crusher machines and sand making machine manufacturer with a complete line of crushing, grinding and screening equipment,offer jaw crusher,impact crusher,concrete crushers,rock crushers,cement crusher plant.

Improve the jaw plate service life

The jaw plate is the main jaw crusher spares, it is divided into moving jaw plate and the fixed jaw plate, the size of a variety of models based on different models of jaw crusher, the DSMAC jaw plates are suitable for all kinds of jaw crusher.The key to safe, reliable, and stable operation of a jaw crusher jaw plate, Our jaw plate wear, compressive strength, long life and so manufacturers can greatly reduce operating costs, improve production efficiency, has exported to India,South Africa,Chile, Russia, Western Europe, North America and so on.

The jaw crusher is of a working chamber by moving jaw and fixed jaw, the movable jaw and the fixed jaw to withstand the tremendous crushing force and friction materials, easily worn in order to protect the jaw, generally moving jaw and fixed jawsurface mount the wear of the liner, this liner, also known as a broken plate. Broken the surface of the plate is usually made ​​of tooth, broken tooth peaks, board angle of 90 ° ~ 120 °, its size is determined by the nature of the materials being broken and block, crushing the bulk material, the angle to be bigger; crushing small block of material, the angle can be smaller. The size of the pitch depends on the granularity of the product is usually taken approximately equal to the width of the discharge port, than desirable tooth height and pitch of 1/2 ~ 1/3.

The work of the board two parts wear is not the same speed, the lower wear out faster than the upper, broken, broken plates in the jaw crusher, direct contact with the material to withstand the tremendous crushing force and the friction of the material,crushing the life of the board is directly related to the jaw crusher work efficiency and production costs, therefore, extend the life of the jaw crusher broken board is particularly important. Strengthen jaw broken machine broken plate life can be considered in terms of design, material selection, assembly and use in the process of improvement.

Assembly, broken boards must be firmly attached to the E-board, between the two should be leveled, broken between the plate and the jaw with a soft metal (such as lead, zinc, etc.) for gasket and bolt. Crusher, crushing the board there should be no loosening, or easily broken or worn broken board, reduce the service life of the broken plate.

In conclusion, aspects to strengthen jaw plates life from material selection, assembly, and process improvements to strengthen jaw broken broken plate life, jaw rock breaking machine in order to improve production efficiency, reduce production costs. If you have any other question about jaw crusher spares-jaw plates, please contact us online or leave your message. We will design and offer you the suitable jaw plate according to your jaw plates drawing.

This article from: http://www.crusherspares.org